The Mint Green Color Code: HEX, RGB, CMYK

Few colors feel as clean and effortless as mint green.

Mint green is a cool, secondary color that combines green with white and a hint of blue. The color carries strong associations with freshness and calm, sitting within the pastel color family with RGB values typically around (152, 255, 152).

It shows up everywhere, from web design and packaging design to interior decor and seasonal fashion.

This guide covers everything you need: color codes, shades, color palette combinations, color psychology, and practical tips for using mint green across design, branding, and fashion.

Mint Green Color Codes

Mint green sits within the cool side of the color theory spectrum, a light, airy green with blue undertones that places it between pure green and soft teal on the color wheel. It is a secondary color derived from mixing blue and yellow with a large proportion of white, landing firmly in the pastel color family.

The most widely referenced version of mint green carries the HEX code #98FF98, though variations exist depending on the source and application.

• RGB: 152, 255, 152
• HEX: #98FF98
• CMYK: 40%, 0%, 40%, 0%
• HSL: 120deg, 100%, 80%

In the RGB color model, mint green is composed of 59.6% red, 100% green, and 59.6% blue. The equal red and blue values give it that balanced, fresh tone without pulling too warm or too cool. In CMYK, it carries no magenta and no black, which explains why it prints so clean and light. The hue angle sits at exactly 120 degrees in HSL, right on the pure green axis, with maximum saturation and high lightness pushing it into pastel territory.

For print projects, a close Pantone match is PMS 351 C (HEX #A2E4B8, CMYK 32, 0, 33, 0). Need to switch between color systems? Use an RGB to HEX Converter or a HEX to RGB Converter to get accurate values across formats. For print work, an RGB to CMYK converter keeps your colors consistent between screen and paper.

—

Mint Green Color Palettes

Mint green works across a wide range of color palette structures. Its cool, light tone makes it flexible enough to anchor both soft and bold combinations.

Want to build your own combinations? A color palette generator is the fastest way to test mint green alongside other tones before committing to a scheme. You can also run an HSL to RGB converter if you prefer working in HSL space.

—

Mint Green Shades

Mint green encompasses multiple variations including pale mint, light mint, standard mint green, seafoam mint, deep mint, and muted celadon mint.

Each variation differs in lightness and saturation, with some leaning lighter toward white and others shifting darker toward a deeper cool green, creating distinct aesthetic effects across design applications.

—

What Are the Primary Attributes of Mint Green?

Mint green possesses five primary attributes: cool-toned hue (derived from green with blue influence), high lightness (near-white brightness), low saturation range (from vivid to muted tints), refreshing visual weight (light and airy presence), and strong associations with nature and cleanliness.

—

How Is Mint Green Used in Interior Design?

Mint green functions as both a wall color and an accent in interior design, creating fresh, airy spaces that make rooms feel larger and lighter.

Designers use it for bathroom walls, bedroom accents, kitchen cabinet fronts, and soft furnishing textiles to build calm, modern environments that work across Scandinavian, coastal, and minimalist styles.

It pairs especially well with white, warm wood tones, and brushed gold hardware. In small rooms or north-facing spaces with cool light, the blue undertones can become more pronounced, so it is worth testing a painted swatch before committing. Works great in bedrooms, bathrooms, and wellness-focused rooms where a light, calming feel matters most.

—

What Psychology and Emotions Does Mint Green Evoke?

Mint green evokes feelings of calm, clarity, freshness, and renewal through its association with mint leaves, cool water, and open natural spaces.

Color psychology research indicates mint green reduces stress and anxiety, supports focus, and creates low-stimulation environments that help with rest, concentration, and creative thinking.

It carries cultural associations with cleanliness and health, partly because of its long history in medical and pharmaceutical spaces. Spiritually, it is linked to emotional healing and a softer expression of the heart chakra. Not as grounding as deeper greens, not as energizing as lime. It sits in a calmer middle ground.

—

How Is Mint Green Applied in Fashion and Clothing?

Mint green serves as a seasonal staple in spring and summer fashion, offering fresh softness through dresses, blouses, tailored trousers, knitwear, and accessories.

Fashion designers use it for its versatility across skin tones, its easy coordination with neutrals and pastels, and its capacity to shift between casual and formal contexts without losing its character.

It pairs well with white, nude, blush pink, navy, and rose gold. Works across both polka dot and floral patterns, which is something sage or olive rarely pulls off as cleanly. Nail polish, scarves, and bags in mint green have stayed consistently popular since the color’s Art Deco-era debut in fashion.

—

What Colors Complement and Contrast With Mint Green?

Mint green complements white, rose gold, navy blue, lavender, and coral while contrasting effectively with deep purple, hot pink, and rich terracotta.

These combinations create polished, versatile palettes that use mint green’s cool lightness for balance, freshness, and visual breathing room.

Complementary Colors

Mint Green + White

• Color Theory Basis: White amplifies mint green’s lightness and keeps the palette clean
• Visual Effect: Airy, minimal, spa-like
• Best Applications: UI backgrounds, bathroom interiors, packaging design
• Ratio Recommendations: 70% white, 30% mint green
• Example Uses: Health brand websites, skincare packaging, bedroom walls

Mint Green + Rose Gold

• Color Theory Basis: Warm metallic against cool green creates soft contrast
• Visual Effect: Elegant, modern-feminine, refined
• Best Applications: Wedding stationery, beauty branding, lifestyle photography
• Ratio Recommendations: 60% mint, 40% rose gold accents
• Example Uses: Event branding, jewelry packaging, Instagram layouts

Mint Green + Navy Blue

• Color Theory Basis: Deep cool anchors light cool for high contrast within the same temperature
• Visual Effect: Nautical, grounded, confident
• Best Applications: Coastal interiors, menswear styling, editorial design
• Ratio Recommendations: 65% navy, 35% mint
• Example Uses: Brand identities, interior accent schemes, fashion editorial

Mint Green + Coral

• Color Theory Basis: Warm-cool split complementary pairing creates lively energy
• Visual Effect: Playful, vibrant, summery
• Best Applications: Event marketing, kids’ products, social media graphics
• Ratio Recommendations: 50/50 or 60% mint dominant
• Example Uses: Festival branding, seasonal promotions, greeting cards

Contrasting Colors

Mint Green + Deep Purple

• Contrast Type: Split-complementary
• Visual Impact: Bold, unexpected, high tension
• Best Applications: Fashion styling, poster design, luxury packaging
• Balance Strategy: Use mint as the dominant base, purple as a tight accent only

Mint Green + Hot Pink

• Contrast Type: High-energy warm-cool clash
• Visual Impact: Energetic, retro-influenced, attention-grabbing
• Best Applications: Youth fashion, social campaigns, pop-art inspired design
• Balance Strategy: Keep hot pink to 20% or less, use as a punctuation element

Mint Green + Terracotta

• Contrast Type: Cool-warm color temperature contrast
• Visual Impact: Natural, grounded, warm-meets-fresh
• Best Applications: Interior design, earthy branding, bohemian fashion
• Balance Strategy: Let the two colors share equal weight, bridge with cream or off-white

Color Scheme Types

• Monochromatic: Layer pale mint (#C1FFC1), standard mint (#98FF98), and deep mint (#3EB489) for a tonal, cohesive palette
• Analogous: Pair mint green with seafoam and light lime for a soft, nature-inspired range
• Triadic: Combine mint green with soft lavender and light peach for a balanced pastel triad
• Split-complementary: Use mint with blush pink and soft lilac for a gentle, feminine scheme
• Tetradic: Combine mint, seafoam, soft coral, and lavender for a full four-color palette with high variety

Practical Pairing Guidelines

• 60-30-10 Rule: Use mint green as 60% base, a neutral like white or cream for 30%, and one accent color (coral, navy, or gold) for the remaining 10%
• Accent Color Strategy: Mint green works best as the dominant field color with warm or dark accents for emphasis
• Neutral Bridging: Cream, warm white, and light gray all connect mint green cleanly to bolder accent colors without visual clashing

If you are checking accessibility for text placed over mint green, run it through a color contrast checker to confirm WCAG compliance.

—

How Does Mint Green Differ From Similar Cool Colors?

Mint green differs from seafoam (more blue-leaning, aquatic), sage green (warmer, yellow-brown undertones, more muted), celadon (grayer, quieter, more restrained), and pastel green (softer, lower contrast) through its specific balance of cool blue undertones, high lightness, and clean brightness.

Visual Comparison Chart

—

How Do You Create Mint Green in Different Mediums?

Create mint green by mixing white with a small amount of green (plus a touch of blue) in paint, inputting HEX #98FF98 in digital design, or setting RGB values to approximately (152, 255, 152) in screen-based applications, ensuring the high green value and equal red and blue channels dominate the mixture.

Acrylic Paint

• Base colors needed: Titanium White, Phthalo Green (or Viridian), small amount of Cerulean Blue
• Mixing ratios: Approximately 70% white, 25% green, 5% blue
• Step-by-step: Start with a generous amount of white. Add green in small increments, mixing fully each time. Add the smallest possible touch of blue to cool it down and shift it away from yellow-green. Test against white paper in natural light.
• Common mistakes: Adding too much blue turns it seafoam. Too much yellow-green makes it closer to lime. Start conservative.
• Adjustment tips: If too yellow, add a tiny amount of blue. If too saturated, add more white.

Titanium White is what makes the difference here. Adding white directly to fluid acrylic also works, as it gives you a slightly more opaque result with minimal brushstroke texture.

Oil Paint

• Pigments required: Titanium White, Viridian or Phthalo Green, Cerulean Blue
• Mixing technique: Mix on a glass palette; oils blend more slowly so you can adjust incrementally without waste
• Drying time considerations: Mint green in oils can appear slightly darker wet. Test on a scrap and let dry before finalizing your mix ratio.

Watercolor

• Pigment selection: Phthalo Green (transparent), Cerulean Blue (transparent), with water as the lightening agent rather than white
• Dilution ratios: High water-to-pigment ratio; mint green in watercolor is mostly water with minimal pigment
• Layering technique: Build from very pale washes and layer until you reach the desired saturation. Adding white gouache in a final layer can bring it toward a more opaque mint if needed.

Gouache

Gouache handles mint green well because of its opacity. Mix Phthalo Green, Titanium or Zinc White, and a small amount of Cerulean or Cobalt Blue. The opacity of gouache means your mint green will appear more matte and flat than acrylics, which suits packaging mockups and illustration work. Dry gouache mint tends to lighten slightly, so mix slightly deeper than your target.

Print (CMYK)

• Cyan: 40%
• Magenta: 0%
• Yellow: 40%
• Black: 0%
• Printing considerations: Mint green prints cleanest on coated, bright-white paper. On uncoated stock, expect it to shift slightly warmer and duller. Always request a printed proof before finalizing.
• Pantone matching: Closest match is PMS 351 C (HEX #A2E4B8). Use a CMYK to RGB converter if you need to cross-check values between print and screen formats.

—

What Are the Best Practices for Using Mint Green in Design?

Best practices for mint green include pairing it with high-contrast text colors, using it as a background rather than a primary text color, limiting it to one or two roles within a layout, and anchoring it with neutrals or deeper tones.

Designers should verify contrast ratios meet WCAG accessibility standards, especially for body text over mint-colored backgrounds. Pure black or very dark navy on mint green typically passes contrast requirements at standard font sizes, but lighter text on mint will almost always fail.

In web design, mint green works particularly well for card backgrounds, button hover states, section dividers, and illustration accents. Avoid using it for large blocks of body text. As a logo color, it reads best at medium to large sizes since its lightness can get lost at small scales. In packaging design, pair it with a darker secondary color to give the pack enough shelf presence.

Use visual hierarchy principles to control where mint green draws attention. When everything is mint, nothing stands out. Treat it as a supporting color, not the entire system.

—

What Role Does Mint Green Play in Branding and Marketing?

Mint green plays a fresh, approachable role in branding and marketing, communicating cleanliness, wellness, and calm reliability to consumers.

Research into color psychology in marketing indicates mint green builds trust and reduces visual friction, making it well-suited for health, beauty, food, and lifestyle brands seeking a modern, non-clinical version of green.

It works especially well for brands targeting a wellness-minded, design-aware audience. Think skincare, organic food, fitness apps, and eco-conscious packaging. Mint green signals freshness without the intensity of lime green or the corporate weight of dark green. It is approachable, which is exactly what a lot of direct-to-consumer brands want right now.

In brand guidelines, mint green often appears as a secondary or accent tone rather than the primary brand color, working alongside white, charcoal, or gold. A well-built brand style guide will specify the exact HEX, RGB, CMYK, and Pantone values to keep mint green consistent across print, screen, and product applications.

For typography set over mint green backgrounds in branded materials, check your typography choices carefully. A clean sans-serif font in dark charcoal or navy typically reads best on mint green surfaces.

FAQ on Mint Green Color

What Is the Hex Code for Mint Green?

The most widely used hex code for mint green is #98FF98. Variations exist depending on the source. PMS 351 C (#A2E4B8) is the closest Pantone match, and the standard RGB value sits at (152, 255, 152).

What Colors Make Mint Green?

Mix white with green, then add a small touch of blue. The white lightens the green into a pale, cool tint. Too much blue pulls it toward seafoam. Too much yellow-green pushes it toward lime. Start conservative and adjust in small amounts.

What Colors Go With Mint Green?

Mint green pairs well with white, rose gold, navy blue, coral, and lavender. It contrasts effectively with deep purple and terracotta. Neutral bridges like cream or warm white help connect mint green to bolder accent colors without visual clashing.

Is Mint Green a Warm or Cool Color?

Mint green is a cool color. Its blue undertones place it on the cool side of the color wheel. This is what separates it from sage green, which leans warm with yellow and brown undertones, making the two feel very different despite both being light greens.

What Is the Difference Between Mint Green and Sage Green?

Mint green is bright, cool, and blue-leaning. Sage green is muted, warm, and carries yellow or brown undertones. They rarely substitute for each other well. Mint reads fresh and modern; sage reads earthy and grounded. The two serve very different design moods.

What Does Mint Green Symbolize?

Mint green symbolizes freshness, calm, clarity, and renewal. It carries associations with cleanliness, wellness, and nature. In color psychology, it is linked to reduced stress, clear thinking, and emotional balance, making it a popular choice for health and wellness spaces.

Is Mint Green a Pastel Color?

Yes. Mint green sits within the pastel color family due to its high lightness and low-to-medium saturation. Like other pastels, it is created by mixing a pure hue with a large amount of white. You can explore related tones in pastel color palettes for comparison.

What Is the CMYK Value for Mint Green?

The CMYK value for mint green (#98FF98) is C:40%, M:0%, Y:40%, K:0%. It carries no magenta and no black, which is why it prints so light and clean. For print accuracy, always request a proof, as results shift on uncoated paper stock.

How Is Mint Green Used in Branding?

Mint green appears frequently in health, beauty, food, and lifestyle branding. It communicates approachability and freshness without the clinical weight of pure white or the intensity of lime green. It works best as a secondary brand color, paired with white, charcoal, or warm neutrals in a brand style guide.

What Is the Difference Between Mint Green and Seafoam?

Seafoam pulls more blue and feels aquatic. Mint green sits closer to pure green with a lighter, brighter tone. Seafoam reads more coastal and relaxed; mint green reads cleaner and more modern. Both are cool-toned, but seafoam’s blue dominance makes the two visually distinct side by side.

Conclusion

This article on mint green color has covered everything from its technical values to its role across design, fashion, and branding.

It is a cool, light hue with a precise identity. The equal red and blue channels in its color code give it that clean, balanced tone that sits apart from teal, lime green, and pistachio.

Whether you are building a mood board, choosing a wall paint, or defining a color scheme for a brand, mint green brings calm and freshness without feeling flat or generic.

Its soft complementary color scheme options and strong psychological associations make it a reliable choice for design elements that need to feel approachable and modern at the same time.

• Author
• Recent Posts

Bogdan Sandu

Bogdan Sandu is a seasoned designer who has been designing websites since 2008.

Renowned for his expertise in logo design and visual branding, Bogdan has developed a multitude of logos for various clients.

His skills extend to creating posters, vector illustrations, business cards, and brochures. Additionally, Bogdan's UI kits were featured on marketplaces like Visual Hierarchy and UI8.

He also wrote in the past years on sites like Design Your Way, WebDesignerDepot, WPDean, Designmodo, Speckyboy, Slider Revolution, and more.

Latest posts by Bogdan Sandu (see all)

• Pantone to RGB Converter - 29 July 2026
• Baseball Team Color Codes - 28 July 2026
• How Creators Can Use AI Image Tools to Make Better Visual Content - 28 July 2026