The official Philadelphia Phillies colors are red, blue and white. The primary color is Phillies red (#E81828), paired with blue (#002D72) and white (#FFFFFF). These three colors run through the logo, the pinstriped home uniform and every piece of merchandise, with the current script identity in place since 1992.
Philadelphia Phillies Color Codes
| Color | Swatch | HEX | RGB | CMYK | Pantone |
|---|---|---|---|---|---|
| Phillies Red | #E81828 | 232, 24, 40 | 0, 100, 65, 15 | PMS 200 C | |
| Phillies Blue | #002D72 | 0, 45, 114 | 100, 91, 27, 16 | PMS 288 C | |
| White | #FFFFFF | 255, 255, 255 | 0, 0, 0, 0 | n/a |
A note on the Pantone numbers: PMS 200 C and PMS 288 C are the ones the club and its licensees actually use, so those are safe. White has no PMS equivalent (it is the paper, or the fabric). If you see a page listing a Pantone code for white, close the tab.
The older blue still floating around
Half the color-code sites you land on will hand you #284898 (PMS 287 C) for the blue. That was the Phillies blue used from 1992 to roughly 2018. It reads brighter, closer to royal blue. The current one is darker. If a client sends you an old brand sheet, check the date before you build anything.
Breaking Down Each Color
Phillies red (#E81828)
This is the franchise. Not a soft brick, not a wine tone, just loud saturated red sitting at RGB 232, 24, 40.
It fills the script “Phillies” wordmark, the pinstripes on the home uniform, the cap, the batting helmet and roughly ninety percent of what you’ll see in the stands in October. The shade arrived with the 1992 rebrand, when the team dumped the burgundy era and went back to a brighter tone closer to what they wore in the 1950s and 60s. PMS 200 C is a common MLB red, so don’t be surprised when it turns up on other clubs’ sheets too.
Phillies blue (#002D72)
The blue is the supporting act, and it’s darker than most people assume. #002D72 is a deep, almost navy dark blue, not the mid-tone royal it used to be.
Where does it actually show up? The Liberty Bell silhouette behind the wordmark. The stars replacing the dots on the two i’s in the script. The cap worn with the cream alternates. Sleeve trim. That’s about it. Blue is a trim color for this team, which is why fans keep asking the club to use more of it.
White (#FFFFFF)
Pure white does the separation work. It outlines the red script so the letters don’t drown against the blue bell, and it’s the base of the home jersey underneath the pinstriping. Boring on paper, structural in practice. Kill the white outline in the logo and the whole mark turns to mush at small sizes.
Uniform Colors: Five Looks, Not Three
Home (red pinstripes): white base, red pinstripes, red script, red cap. Primary home look since 1992, worn for most night games at Citizens Bank Park.
Road: classic gray with the red “Philadelphia” script and a red cap. Nothing clever, and that’s the point.
Cream alternate: introduced in 2008, a nod to the 1946 to 1949 home set. Off-white cream base, red script, blue cap. Day games, mostly.
Powder blue throwback: the famous one. Light powder blue around #6BACE4, paired with a maroon cap (roughly #6F263D, PMS 209 C). Primary road set from 1972 to 1988, back in the rotation since 2018 on Thursdays. Please don’t call it baby blue. Different shade, and people here will correct you.
City Connect: debuted April 12, 2024. Built off the Philadelphia city flag, so it drops red entirely for midnight blue, light blue and yellow, with a jagged “PHILLY” across the chest and a Liberty Bell on the cap. Divisive when it launched. Grew on people.
Color History and Rebrands
The Phillies have been around since 1883, which means a lot of paint has been mixed.
Red and white has been the default for most of that run, but the team spent 1970 to 1991 in burgundy (a deep maroon that photographed almost brown under stadium lights) with those powder blue road sets from 1972 through 1988. That’s the uniform Mike Schmidt and Steve Carlton won the 1980 World Series in.
1992 is the pivot year. New script wordmark, Liberty Bell behind it, red pinstripes at home, brighter red back in charge. That identity is still on the field today, which makes it one of the more stable brands in the National League East.
The quiet change happened around 2018 to 2019, when the blue shifted from PMS 287 C (#284898) to the darker PMS 288 C (#002D72). Barely anyone noticed. Designers noticed.
Then 2024 brought the City Connect set and, later that July, the Independence Blue Cross sleeve patch, the first jersey advertiser in franchise history.
Using the Phillies Palette
Screen work: use the HEX values. Print: CMYK or the Pantone numbers above, and if you’re printing red on anything absorbent, run a test. PMS 200 C sinks fast on uncoated stock and comes out looking dusty.
One thing I always do before starting a Phillies mockup: drop the red on white first, then the red on blue. If the red still reads at 60 percent zoom against the dark blue without the white outline, your contrast is fine. If it doesn’t, add the outline back.
“ :root { --phillies-red: #E81828; --phillies-blue: #002D72; --phillies-white: #FFFFFF;
/ legacy + throwback / –phillies-blue-1992: #284898; –phillies-maroon: #6F263D; –phillies-powder-blue: #6BACE4; } `
Red on white with blue as the accent is the safe hierarchy. Red on blue works only with a white separator. Blue on red is a mistake, no matter how good it looks in your head at 2am.
Related Reading
The full hub of baseball team color codes covers every MLB club in one place.
Divisional neighbors, if you’re building a National League East set: New York Mets colors, Atlanta Braves colors, Washington Nationals colors and Miami Marlins colors. Worth comparing the Phillies red against the St. Louis Cardinals colors too, since both lean on a bold red but land in different places.
On the color-theory side: collections of red color palettes and blue color palettes will give you supporting tones, and if you’re recreating that 1970s throwback feel, look at retro color palettes.
FAQ on The Philadelphia Phillies Colors
What are the Philadelphia Phillies colors?
The Philadelphia Phillies colors are red, blue and white. Red is the primary color (#E81828), with blue (#002D72) as the secondary and white filling the outlines. The scheme runs through the logo, home pinstripes and merchandise.
What are the Phillies color codes in HEX and RGB?
Phillies red is #E81828, RGB (232, 24, 40). Phillies blue is #002D72, RGB (0, 45, 114). White is #FFFFFF, RGB (255, 255, 255). Those three cover every current logo and jersey application.
What is the Phillies Pantone color?
The two official Pantone values are PMS 200 C for red and PMS 288 C for blue. White has no PMS match. Use these for print, embroidery and any licensed fan gear where color accuracy matters.
What is the primary color of the Philadelphia Phillies?
Red. It dominates the script wordmark, the cap, the batting helmet and the pinstripes on the home jersey at Citizens Bank Park. Blue works as trim, mainly inside the Liberty Bell and the star dots.
When did the Phillies adopt their current colors?
The current identity dates to the 1992 rebrand, which ended the burgundy era and brought back a brighter red plus the Liberty Bell logo. The blue was darkened from PMS 287 C to PMS 288 C around 2019.
Why did the Phillies wear maroon and powder blue?
From 1970 to 1991 the team used burgundy, with powder blue road uniforms from 1972 to 1988. Mike Schmidt and Steve Carlton won the 1980 World Series in that palette, which is why the throwbacks still sell.
Are the Phillies colors the same as the Boston Red Sox?
No. Boston Red Sox colors use a darker red (#BD3039) with navy. Phillies red is brighter and more saturated at #E81828. Both are PMS-defined reds, but they sit visibly apart side by side.
What color are the Phillies pinstripes?
Red on a white base. The home uniform has carried red pinstripes since 1992, paired with a red cap and the red script across the chest. Road grays skip the pinstriping entirely.
What colors are the Phillies City Connect uniforms?
Midnight blue, light blue and yellow, taken from the Philadelphia city flag. The City Connect set debuted April 12, 2024, dropping red completely, with a jagged PHILLY wordmark and a Liberty Bell cap logo.
Do the Phillies use black in their palette?
No. Unlike the Cincinnati Reds colors, which pair red with black, the Phillies stick to red, blue and white. Black shows up only on unofficial fan merchandise and third-party gear.
Conclusion
The Philadelphia Phillies colors come down to three values you can copy in ten seconds: #E81828, #002D72, #FFFFFF, backed by PMS 200 C and PMS 288 C for print work.
What makes the palette interesting is the stuff around the edges. The maroon caps, the powder blue Thursdays, the cream alternates, the Liberty Bell sitting behind the script.
Grab the CSS block above, keep the white outline, and your Phillies mockups will hold up.
Renowned for his expertise in logo design and visual branding, Bogdan has developed a multitude of logos for various clients.
His skills extend to creating posters, vector illustrations, business cards, and brochures. Additionally, Bogdan's UI kits were featured on marketplaces like Visual Hierarchy and UI8.
He also wrote in the past years on sites like Design Your Way, WebDesignerDepot, WPDean, Designmodo, Speckyboy, Slider Revolution, and more.
- How to Create Logos Faster Using AI in 2026 - 11 August 2026
- Stylish Josefin Sans Font Pairing for Modern Brands - 10 August 2026
- What Is an Extended Font and When to Use It in Design? - 9 August 2026
Bogdan Sandu is a seasoned designer who has been designing websites since 2008. Renowned for his expertise in logo design and visual branding, Bogdan has developed a multitude of logos for various clients. His skills extend to creating posters, vector illustrations, business cards, and brochures. Additionally, Bogdan's UI kits were featured on marketplaces like Visual Hierarchy and UI8. He also wrote in the past years on sites like Design Your Way, WebDesignerDepot, WPDean, Designmodo, Speckyboy, Slider Revolution, and more.
You Might Also Like
